Sign Up!

🔥 Hot right Now! 🌶
🏆 Claim your level milestone badges:
1000 // 2000 // 3000 // 4000 // 5000 // 6000 // 7000
👯‍♀️Find your Team HERE!

Transporting and raising the stones

_Elsa_
_Elsa_ Posts: 36,641 Sweet Legend
edited October 2021 in Candy Friends Stories

‘Transporting the stones - There are two types of stone at Stonehenge – the larger sarsen stones and the smaller ‘bluestones’.

The sarsen stones are a type of silcrete rock, which is found scattered naturally across southern England. For many years most archaeologists believed that these stones were brought from the Marlborough Downs, 20 miles (32km) away, but their exact origin remained a mystery. However, recent research using a novel geochemical approach has not only confirmed that the Marlborough Downs were indeed the source but has pinpointed the specific area that the sarsens most likely came from – the area known as West Woods, south-west of Marlborough.

On average the sarsens weigh 25 tons, with the largest stone, the Heel Stone, weighing about 30 tons.

Bluestone is the term used to refer to the smaller stones at Stonehenge. These are of varied geology but all came from the Preseli Hills in south-west Wales. Although they may not appear blue, they do have a bluish tinge when freshly broken or when wet. They weigh between 2 and 5 tons each.

The bluestones had a complex and varied history, with their current positions at Stonehenge only representing their final locations. Some of the bluestones are likely to have previously stood in a stone circle on the bank of the river Avon at West Amesbury henge, 1 mile (1.7km) to the south-east.

Some unspotted dolerite bluestones may originally have been part of a stone circle at Waun Mawn, in the Preseli Hills. Here, recent excavations have uncovered empty stoneholes, showing that at least six bluestone pillars were removed from this site in prehistory. When the bluestones were originally set up at Stonehenge they were erected in an arc of double stoneholes, known as the Q and R holes, before being later rearranged into their current arrangement of outer circle and inner horseshoe.

The Altar Stone is made of a type of sandstone found in south-east Wales, in the area of the Brecon Beacons or Black Mountains.

Shaping the stones - Large quantities of sarsen and bluestone waste material, as well as broken hammerstones, have been found in the field to the north of Stonehenge, where the stones were worked into shape.

Sarsen and flint hammerstones in various sizes have been found at Stonehenge. The larger ones would have been used to roughly flake and chip the stone, and the smaller ones to finish and smooth the surfaces.

Analysis of a recent laser survey of the stones has revealed the different stoneworking methods used, and has shown that some parts of the monument were more carefully finished than others. In particular, the north-east side and the inner faces of the central trilithons were finely dressed.

To fit the upright stones with the horizontal lintels, mortice holes and protruding tenons were created. The lintels were slotted together using tongue and groove joints. These types of joint are usually found only in woodworking.

Raising the stones - To erect a stone, people dug a large hole with a sloping side. The back of the hole was lined with a row of wooden stakes. The stone was then moved into position and hauled upright using plant fibre ropes and probably a wooden A-frame. Weights may have been used to help tip the stone upright. The hole was then packed securely with rubble.

Timber platforms were probably used to raise the horizontal lintels into position. Then the final stage of shaping the tenons took place, to ensure a good fit into the mortice holes of the lintel.’ (Source)

Let’s continue - Why Was Stonehenge Built?

Start at the beginning – Jean-Luc time travels to the Stonehenge

This discussion has been closed.

Hey! Would you like to give us your opinion?